Large Pitch Offshore Wind Turbine Bearings

Large Pitch offshore Wind Turbine Bearings

LYXQL is a professional manufacture of yaw bearing, pitch bearing and shaft bearings in wind energy, LYXQL has the capacity to manufacture Large Wind Turbine Bearings with outer diameter from 1500mm to 18000mm,our 20years experience in Pitch Hot Sale Wind Turbine Bearings will meet any of your requirements.

Pitch Large Wind Turbine Bearings, also called offshore Pitch Large Wind Turbine Bearings, are critical components of modern wind turbines that connect the rotor hub and rotor blades. Large Wind Turbine Bearings with magnetic allows the required oscillations to control the load and power of the wind turbine. The pitch system brings the blades to the desired position by adjusting the aerodynamic angle of attack. The pitch system is also used for emergency interruption of the turbine system.

offshore Large Wind Turbine Bearings is installed between the blade and the hub, and the inner and outer rings are respectively connected with the blade and the hub by bolts, so that the blade can rotate relative to its axis to achieve the purpose of pitch change. It mainly bears radial load, axial load and overturning moment.

 According to the working characteristics of the Pitch Wind Turbine Bearings, it is required that the offshore Wind Turbine Bearings should have high reliability, flexible operation, high temperature resistance, severe cold resistance, wind sand resistance, and corrosion resistance, under environmental conditions, the rated life span reaches 20 years. At the same time, the gear of the pitch bearing also has higher requirements, and it is also required that the pitch bearing should have good sealing performance.

Application of LYXQL Pitch Quality Wind Turbine Bearings is as following: wind generator, wind turbines, harbor cranes, ship deck cranes, construction cranes, shield machines, bulk materials handling equipment, ferris wheels and etc.